Product code

Controller Pixelstrip MKII

up to 16 strips
Discontinued product
The Pixel strip controller MKII is necessary to give power and data to the Pixelstrip MKII. It's a dedicated controller and the strips cannot be controlled without it. The controller has a Klingnet in- and output RJ-45 for easy daisy chaining your klingnet setup. It has 4x RJ-45 outputs. Each output can be set for 1 – 4 strips which counts a total of 16 strips for one controller. The controller has DMX, Klingnet and Artnet. Klingnet and Artnet to use for full pixelcontrol and DMX to control the built in programs. The 2x18 character display makes it easy to set network and fixture settings.
  • Control up to 16 strips
  • 4 outputs
  • DMX512, Artnet, Klingnet
  • Easy daisy chain
Control ProtocolDMX512, Artnet, Klingnet
DMX channelsDMX512; 8ch / Artnet Separate Pixel Control; 1920ch (16 strip setup)
Built-in programs30 (can be selected over DMX512)
Strip setup1 – 4pcs each output
Power Supply100-240 VAC, 50/60Hz
Power Consumption400W Max
Dimensions290 x 200 x 86mm
HousingDie-cast aluminium, metal bracket
Power ConnectorsBlue/White Power connector
Klingnet ConnectionsRJ-45 in-&output
Max Controller/strip lenght10m
DMX Connections3p XLR in-&output
Outputs4x RJ-45
Operation temperature-5~40°C
Product code42273

Recently Viewed Products