Product code
42276

PixelBatten P25 MKII

DMX, Kling- & Artnet
Pixel Controlled Shapes
Discontinued product
The PixelBatten P25 MKII is more versatile then it's predecessor. Now it is equipped with not only Klingnet, but also DMX and Artnet onboard. This makes it possible to use the PixelBatten with a wider range of controllers and software. It has two Ethernet RJ-45 ports with built-in switch for linking Klingnet or Artnet. Powercon in/out and DMX in/out for daisy chain power and data. The 2x18 character display makes it easy to set network and fixture settings. The DMT Pixelbatten P25 MKII has a length of 1m and contains 160 pixels with a pitch of 25mm. The pixels are mounted in a configuration of 40x4 pixels. It has a sliding bracket for flexible rigging and the possibility to connect multiple battens in vertical position to eliminate gaps in between. Each batten should always be rigged separately. Use the batten in combination with the strip and the tile to make creative visual setups.
  • Klingnet, Artnet, DMX
  • Built-in Ethernet switch
  • P25 4x40 pixels
  • Sliding bracket
Light Source
LED System160x 5050 SMD RGB
Luminance850 nits
Refresh rate100Hz
Electrical
Power Supply100-240 VAC, 50/60Hz
Power Consumption100W Max
Control
Control ProtocolDMX512, Artnet, Klingnet
DMX channels8, 480Ch
Built-in programs30 (can be selected over DMX512)
Optical system
Dimmer0-100%
Max strobe freq25Hz
View Angle120 degrees
Pixels40Hx4V
Pixelpitch25mm
CoverMedium Frost
Physical
Dimensions1000 x 140 x 105mm
Weight3,8Kg
HousingDie-cast aluminium, metal bracket
ColorBlack
Power ConnectorsBlue/White Power connector
Data Connectors3p XLR, RJ-45 in-&output
CoolingConvection
Safety
Operation temperature-5~40°C
ProtectionIP-20
Product code42276
EAN8717748366795

Recently viewed