Product code

Pixel Tile P25 MKII

DMX, Kling- & Artnet
Discontinued product
The Pixeltile P25 MKII is a square 300x300mm pixel fixture. It is equipped with Klingnet, Artnet and DMX protocol. This makes it possible to use the Pixel tile with a wide range of controllers and software. It has two Ethernet RJ-45 ports with a built-in switch for linking Klingnet or Artnet. Powercon in/out and DMX in/out for daisy chain power and data. The 2x18 character display makes it easy to set network and fixture settings. The DMT Pixeltile P25 contains 144 pixels with a pitch of 25mm. The pixels are mounted in a configuration of 12x12. It has a sliding bracket for flexible rigging and the possibility to connect multiple battens in vertical position to eliminate gaps in between. Each batten should always be rigged separately. Use the Tile in combination with the strip and the batten to make creative visual setups. The Pixeltile also has the same measurements as the Showtec White pix which makes them easy to combine in a grid.
  • Klingnet, Artnet, DMX
  • Built-in Ethernet switch
  • P25, 12x12 pixels
  • Built-in programs
Light Source
LED System144x 5050 SMD RGB
Luminance850 nits
Refresh rate100Hz
Power Supply100-240 VAC, 50/60Hz
Power Consumption150W Max
Control ProtocolDMX512, Artnet, Klingnet
DMX channels8, 432Ch
Built-in programs30 (can be selected over DMX512)
Optical system
Max strobe freq25Hz
View Angle120 degrees
CoverMedium Frost
Dimensions300 x 300 x 60mm (Excl bracket)
HousingDie-cast aluminium, metal bracket
Power ConnectorsBlue/White Power connector
Data Connectors3p XLR, RJ-45 in-&output
Operation temperature-5~40°C
Product code42277

Recently Viewed Products