Product code


Active direct box
The ADI-200 active DI box will help you with instruments that have a low level and high impedance output. It will convert the output to a more suitable signal without interfering or modifying the signal. With the ADI-200 your signal can be driven up to long cable lengths without any problems. It offers a clean and undistorted signal as well as reliability on touring stages. It works on a 9V battery or with phantom power. It has a ground lift function and an attenuation switch for 20dB.
  • Roadproof housing with rubber feet
  • Low distortion
  • Ground lift
  • 20dB Attenuation switch
R.R.P. € 48.50 Subtotal ex. vat
Mono Input Impedance250.000 Ω
Mono Input Connector3pole XLR, TRS unbalanced 6,3mm
Mono Inputs1
Main Outputs1
Main Output Connector3pole XLR, TRS unbalanced 6,3mm
Phantom Power18V, 24V, 48V
Frequency Response Maximum40.000 Hz
Frequency Response Minimum10 Hz
Signal - Noise Ratio> 105dB
THD Distortion Level< 0.005%
Voltage9 V
Type9V block PP3
HousingMagnesium Die-cast
IP RatingIP20(indoor use only)
Weight0,65 kg
Width (mm)135 mm
Height (mm)55 mm
Length (mm)145 mm
LED IndicatorsPower
Reference StandardCE
Product codeD1943

Recently Viewed Products