Dear Customer, starting September 21st, Highlite International BV will start sending all packing lists by e-mail. This ‘going green’ means we will stop printing packing slips, to save paper and enveloppes.
Product code


Active subwoofer
Sturdy and roadproof speakers with black scratch resistant paint with MDF reinforced housings for the tops and plywood reinforced housings for the active subwoofers. The top speakers are bi-amped and range from 125W to 250W, while the subwoofers range from 600W to 700W. All active speakers have 35mm polemount connectors.

  • 600 Watt
  • High Pass output
  • Compact design
  • Lightweight: 15,46 kg
R.R.P. € 325.- Subtotal ex. vat
Mono Inputs2
Mono Input Connector3pole XLR / TRS balanced 6,3mm
Mono Balanced Input Nominal Level0 dBu
Mono Input Impedance15.000 Ω
Amplifier RMS Output Power300 W
Amplifier Peak Output Power600 W
Main Outputs2
Main Output Connector3pole XLR
THD Distortion Level< 0.5%
Signal - Noise Ratio> 80dB
Amp TechnologyClass D /Class H
Dampings Factor200 :1
Speaker SystemSubwoofer
Speaker Sensitivity (1w/1m)94 dB
Max. SPL on 1m121,8 dB
Frequency Respons Minimum50 Hz
Frequency Respons Maximum120 Hz
Frequency Respons (-10dB) Minimum45 Hz
Frequency Respons (-10dB) Maximum140 Hz
Crossover Frequency High100 Hz
Woofer Diameter10
Woofer Voice Coil2.5
Woofer Magnet TypeFerrite
Subwoofer Dispersion Angles Horizontal360 °
Subwoofer Dispersion Angles Vertical180 °
Phase ReverseYes
Power Supply100-240VAC 50-60Hz
Power Consumption350 W
Fuse3.15 A
Power Connector inIEC C13 male
Length (mm)421 mm
Height (mm)325 mm
Width (mm)465 mm
Weight15.46 kg
IP RatingIP20(indoor use only)
Material Thickness15 mm
Amplifier CoolingAxial fan
Electronic ProtectionClip limiter (fixed) / Convection-fan / DC voltage / Thermal
LED IndicatorsClip / Power / Signal
Polemount35 mm
Speaker HandlesLeft side / Right side
Reference StandardCE / EMC / LVD / FCC / ETL / RoHS
Included CablesIEC cable
Included AccessoriesUser Manual
Product codeD3640

Recently Viewed Products