Product code

DAP Odin S-18A

Line-Array Subwoofer
The Odin Audio Systems line-array was developed in the Netherlands, by professionals and for professionals. Nevertheless, the needs of the less experienced users have been taken into account as well. The software controlled, user-definable built-in presets offer out-of-the-box possibilities and open the door for progression to a professional and customized level.
The enclosure was designed to achieve the best possible acoustic resonance in the low/mid and mid frequencies, resulting in an optimal sound dispersal, even at lower volume levels. Fully equipped with Celestion® speakers, Odin Audio Systems offers loads of character, great features and scalability at an unprecedented price level

The Odin-range continues with the S-18A Active subwoofer, equipped with an 18” Celestion Ferrite Magnet subwoofer with 4” Voice coil. The enclosure itself has been constructed out of the same high grade material and finish like the T-8A Satellite. With 1500W continuous Class D amp power and 6000W peak power the S-18A is a true powerhouse which performs every time. This subwoofer can be used for various setups due to the different mounting options. Use the optional M20 pole mount to arrange a Satellite setup. Or integrate the optional stack frame or fly bar and use the 4-point suspension points to arrange a stack or Line Array setup which suits your venue best.
Powercon Cables & Network cable are not included. To be ordered separate.
  • Celestion 18" woofer inside
  • High Power 1.5KW Class-D Amplifier
  • DSP optimized Amplification ensures highest reliability
  • Multivoltage Power supply with active PFC
R.R.P. € 2,229.- Subtotal ex. vat
Mono Inputs1
Mono Input Connector3pole XLR
Low Driver Power1200 W
Amplifier RMS Output Power1500 W
Amplifier Peak Output Power6000 W
Main Outputs1
Main Output Connector3pole XLR
Crossover Frequency Low32 Hz
Max. SPL on 1m136 dB
Frequency Response (-3dB) Maximum110 Hz
DSP Processor Bitrate32 bit
Speaker Sensitivity (1w/1m)98 dB
Speaker Impedance8 Ω
Speaker SystemSubwoofer
Dampings Factor200 :1
AD/DA Convertor Sample Rate48 kHz
Signal - Noise Ratio> 90dB
THD Distortion Level< 0.5%
Frequency Response (-3dB) Minimum41 Hz
Amp TechnologyClass D
Woofer Magnet TypeFerrite
Woofer Voice Coil4 "
Woofer Diameter18 "
Crossover Frequency High90 Hz
Subwoofer Dispersion Angles Horizontal360 °
Subwoofer Dispersion Angles Vertical180 °
Equalizer Range30 dB
Parametric Output Equalizer8 Bands
Crossover Filter TypesButterworth
Crossover Slopes24
Phase ReverseYes
User PresetsYes
User Presets Capacity10
Control ModePC Software, Stand Alone
Power Connector outPowerCON Grey
Power Connector inPowerCON Blue
Fuse4 A
Power Consumption320 W
Power Supply100-240VAC 50-60Hz
Data Connector outetherCON
Data Connector inetherCON
Length (mm)700 mm
Height (mm)665 mm
Width (mm)635 mm
Weight58.5 kg
IP RatingIP20(indoor use only)
Material Thickness18 mm
Speaker HandlesLeft side, Right side
Electronic ProtectionConvection-fan, Digital limiter, Overload, Thermal
LED IndicatorsClip, Data connect, Power, Protect, Signal
Rigging OptionsFlying, Stacking
Mounting Options4-Point Suspension
Reference StandardCE
Included AccessoriesUser Manual
Included CablesNone
Included RiggingNone
Product codeD3901

Recently Viewed Products